48 5 Troubleshooting
4. If paper is jammed in the printer, gently
remove the paper carefully without tearing.
5. Pull the front cover release levers ("A") on
both sides of the printer towards you and
open the front cover.
Important
• Open the front cover even when there is no jammed
paper in the printer. The error will not clear unless you
open and close the front cover.
6. Remove any jammed paper. Make sure no
torn pieces remain inside.
Important
• The fuser is hot. Do not touch areas with labels
indicating high temperature and those surrounding the
labels. Otherwise, you can get burnt.
7. Close the front cover.
Important
• When closing the front cover, be careful not to get your
fingers caught between (the left, right, top, or bottom
edge of) the cover and the printer.
8. Push the tray all the way into the printer.
Important
• When inserting the tray, be careful not to get your
fingers caught between the tray and the printer or
another tray (if the optional sheet feeders are installed).
Paper Jams in the Fuser Unit
1. Pull the front cover release levers ("A") on
both sides of the printer towards you and
open the front cover.
To Next Page
Loading...
Need help?
General