Xerox DocuPrint M205 b User Manual

197 Copying
 Collated
You can sort the copy output. For example, if you make two copies of three page documents, one
complete three page document will print followed by the second complete document.
NOTE:
• Copying documents with a large amount of data may exhaust available memory. If a memory shortage occurs,
cancel the collating by turning Collated to Off on the operator panel.
1 For the DocuPrint M205 f/M205 fw, load the document(s) face up with top edge in first into the
ADF or place a single document face down on the document glass, and close the document
cover.
For the DocuPrint M205 b, place a single document face down on the document glass, and close
the document cover.
See also:
• "Making Copies From the ADF (DocuPrint M205 f/M205 fw Only)" on page 194
• "Making Copies From the Document Glass" on page 192
2 Press the (Copy) button.
3 Select Collated, and then press the button.
4 Select the desired setting, and then press the button.
NOTE:
• Value marked by an asterisk (*) is the factory default menu settings.
5 If necessary, customize the copy settings including the number of copies, copy size, and image
quality.
See also:
• "Setting Copy Options" on page 195
6 Press the (Start) button to begin copying.
Off* Does not sort the copy job.
On Sorts the copy job.
Auto Automatically determines which output mode for the copy job.

Xerox DocuPrint M205 b Specifications

General

Brand	Xerox
Model	DocuPrint M205 b
Category	Printer
Language	English