Xerox DocuPrint M205 b User Manual

Basic Operation 48
Setting Initial Settings on the Operator Panel
You need to set the printer language, clock date, and time when you turn on the printer for the first
time. (Clock date and time are available only on the DocuPrint M205 f/M205 fw.)
When you turn on the printer, a wizard appears on the LCD panel. Follow the step below to set the
initial settings.
NOTE:
• If you do not start configuring the initial settings, Select Function appears on the LCD panel in three
minutes. After that, you can set the following initial setup by enabling Power On Wizard on the operator
panel if needed.
For more information about the operator panel, see "Understanding the Printer Menus" on page 314.
• For the DocuPrint M205 f/M205 fw
1 Select the language you want to use on the operator panel, and then press the button.
2 Press the button to start setting the region.
3 Select your region, and then press the button.
4 Select the appropriate time zone, and then press the button.
5 Specify the current date, and then press the button.
6 Specify the current time, and then press the button.
7 Press the button for fax setup.
If you want to skip the fax setup, press the (Start) button.
8 Enter your fax number, and then press the button.
9 Enter a name, and then press the button.
10 Press the button to complete the initial settings on the operator panel.
• For the DocuPrint M205 b
1
Select the language you want to use on the operator panel, and then press the button.

Xerox DocuPrint M205 b Specifications

General

Brand	Xerox
Model	DocuPrint M205 b
Category	Printer
Language	English