Using the Operator Panel Menus and Keypad 338
• Secure Receive (DocuPrint M205 f/M205 fw Only)
Purpose:
To specify whether to require a password to print incoming faxes, and to set or change the password.
When Secure Receive Set is set to Enable, the printer stores incoming faxes and prints them
when the correct password is entered on the operator panel.
NOTE:
• You can access to the items under Secure Receive only when Panel Lock Set is set to Enable.
Values:
Scan to E-Mail (DocuPrint M205 f/M205 fw Only)
Use the Scan to E-Mail menu to edit the transmission source.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
• Edit From Field
Purpose:
To enable or disable editing of the transmission source.
Values:
USB Settings
Use the USB Settings menu to change printer settings affecting a USB port.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
•Port Status
Purpose:
To enable or disable the USB interface.
Values:
Secure Receive
Set
Disable* Does not require a password to print incoming faxes.
Enable Requires a password to print incoming faxes.
Change
Password
0000-9999 Sets or changes the password required to print incoming
faxes.
Disable Disables editing of the transmission source.
Enable* Enables editing of the transmission source.
Disable Disables the USB interface.
Enable* Enables the USB interface.
To Next Page
Need help?
General