Copying 208
îš„ Margin Left/Right
You can specify the left and right margins of the copy.
1 For the DocuPrint M205 f/M205 fw, load the document(s) face up with top edge in first into the
ADF or place a single document face down on the document glass, and close the document
cover.
For the DocuPrint M205 b, place a single document face down on the document glass, and close
the document cover.
See also:
• "Making Copies From the ADF (DocuPrint M205 f/M205 fw Only)" on page 194
• "Making Copies From the Document Glass" on page 192
2 Press the (Copy) button.
3 Select Margin Left/Right, and then press the button.
4 Press the or button or enter the desired value using the numeric keypad, and then press
the button.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
5 If necessary, customize the copy settings including the number of copies, copy size, and image
quality.
See also:
• "Setting Copy Options" on page 195
6 Press the (Start) button to begin copying.
4 mm*/0.2 inch* Specify the value in increments of 1 mm/0.1 inch.
0-50 mm/0.0-2.0 inch
To Next Page
Need help?
General