379 Troubleshooting
The envelope is creased after
printing.
Ensure that the envelope is loaded as instructed in "Loading
Envelope in the Multipurpose Feeder (MPF)" on page 153 or
"Loading Envelope in the Priority Sheet Inserter (PSI)" on page 159.
Page breaks in unexpected
places.
Increase the value for Job Time-Out in the System Settings menu,
that is on the Printer Maintenance tab in the Printer Setting Utility.
For the DocuPrint M205 f/M205 fw, increase the time-out value in the
Protocol Settings menu on CentreWare Internet Services.
Print media does not stack neatly
in the center output tray.
Turn the print media stack over in the PSI and MPF.
Printer does not duplex pages. Select Flip on Short Edge or Flip on Long Edge from the Duplex
menu on the Paper/Output tab in the print driver.
Problem Action
To Next Page
Loading...
Need help?
General