Xerox Phaser 4600DN User Manual

General Care and Troubleshooting
Xerox Phaser 4600/4620
User Guide
105
CRU Toner Low Toner Cartridge is almost
empty.
Open top cover. Remove Toner
Cartridge and gently shake it. By
doing this, printing operations can
be temporarily resumed.
Reinstall Toner Cartridge. Close top
cover. Reorder Toner Cartridge.
Toner Empty Toner Cartridge is empty. Open top cover.
Replace with new Toner Cartridge.
Toner Cartridge Not
Installed
The Toner Cartridge is not
installed or not installed
correctly.
Install the Toner Cartridge.
If already installed, check it has
been installed correctly.
If problem persists, call for service.
Toner Supplying Error Toner is not being supplied
correctly.
Check the Toner Cartridge is
installed securely.
Invalid Toner Cartridge The installed Toner Cartridge
is not a valid Xerox cartridge.
Check the Toner Cartridge and
install a valid Xerox cartridge if
necessary.
If problem persists, call for service.
Output
Areas
Output Tray Full Output tray full. Remove printed material from
Output tray.
Staple Cartridge Not
Installed
Staple cartridge not installed. Install staple cartridge.
Stapler Fault Stapler unit does not work. Open stapler door and check the
stapler. Close stapler door.
If the fault persists, Power Off /
Power On.
If the problem persists, call for
service.
Location Errors & Faults Description Solution

Xerox Phaser 4600DN Specifications

General

Brand	Xerox
Model	Phaser 4600DN
Category	Printer
Language	English