USB Flash Memory
Xerox Phaser 4600/4620
User Guide
53
Printing from USB Memory Device
You can directly print files stored on a USB memory device. You can print the following supported file
types:
• PRN: Only files created by the driver provided with your machine are recommended to print from
a USB memory device. If you create PRN files using another machine, the printout may be
different. PRN files can be created by selecting the Print to file check box when you print a
document. The document will be saved as a PRN file, rather than printed on paper.
• TIFF: TIFF 6.0 Baseline.
• JPEG: JPEG Baseline.
• PDF: PDF 1.7 and below.
• PCL: A PCL file.
• PS: A PostScript file.
• TXT: A text file.
To print a document from a USB memory device:
1. Press the up/down arrows until Print from USB is highlighted
and press OK. The Print from USB menu displays.
2. Press the up/down arrows to highlight the required folder and
press OK.
3. Press the up/down arrows until the file you want highlights
and press OK.
4. The Quantity menu displays. Press the up/down arrows to
select the number of copies to be printed or enter the
number. Press OK.
5. The Print from Tray menu is displayed, press the up/down
arrows to highlight the required output tray and press OK.
After printing the file, the display asks if you want to print another job.
6. To print another document, press the left/right arrows to highlight Yes and press OK.
Otherwise, press the left/right arrows to highlight No and press OK.
7. Press Stop to return to ready mode.