To Next Page

To Previous Page

Printing Custom Size or Long Paper

Phaser® 6180MFP Multifunction Printer

5-41

Printing Custom Size or Long Paper

This section explains how to print on custom size paper, such as long paper using the PCL

print driver.

Custom size paper can be loaded in each tray. The way to load custom size paper in the paper

tray is the same as the one to load standard size paper. The way to load custom size paper in

Tray 1 (MPT) is the same as the one to load standard size paper.

When MPT Mode is set to Panel Specified, you need to set the paper type and size settings

for the tray on the control panel in advance.

See also:

Loading Paper in Trays 2 and 3 on page 5-13

Loading Paper in Tray 1 (MPT) on page 5-10

Setting Paper Types and Sizes on page 5-9

Defining Custom Paper Sizes

Before printing, set the custom size on the print driver.

Note: When setting the paper size on the print driver and control panel, be sure to specify the

same size as the actual paper used. Setting the wrong size for printing can cause printer failure.

This is especially true if you configure a bigger size when using a narrow width paper.

Using the PCL Driver

On the PCL print driver, set the custom size in the Custom Paper Size dialog box. This

section explains the procedure using Windows XP as an example.

For Windows 2000 or later, an administrator’s password only allows users with administrator

rights to change the settings. Users without the rights of administrator can only check the

contents.

When configuring the Custom Paper Size dialog box in Windows 2000 or later, settings of

other printers on the computer will also be affected as the form data base of the computer is

used by a local printer. For a shared printer on the network, settings of other shared printers on

the same network in another computer will also be affected as the form data base on the server

with existing print queue is used.

1. From the Start menu, click Printers and Faxes.

2. Right-click the printer, and then select Properties.

3. Select the Configuration tab.

4. Click Custom Paper Size.

5. Use the Details list box to select the custom setup you want to define.

Xerox Phaser 6180MFP User Manual

Other manuals for Xerox Phaser 6180MFP