Control Panel
Phaser® 6180MFP Multifunction Printer
2-9
Information Pages
Your printer comes with a set of information pages to help you obtain the best results from
your printer. Access these pages from the control panel. Print the Menu Map to see where
these information pages are located in the control panel menu structure.
Menu Map
The Menu Map helps you navigate the control panel menus. To print the Menu Map:
1. On the control panel, press the System
button, select Information Pages, and then press
the OK button.
2. Select
Menu Map, and then press the OK button to print.
Note: Print the Menu Map to see other information pages available for printing.
Configuration Page
To print the Configuration page to view current information about your printer, do the
following:
1. On the control panel, press the System
button, select Information Pages, and then press
the OK button.
2. Select
Configuration, and then press the OK button to print.
Turning the Startup Page On or Off
When the printer is turned on, it prints a Startup page by default.
To turn the printing of the Startup page on or off:
1. On the control panel, press the System
button.
2. Select
Admin Menu, and then press the OK button.
3. Select
System Settings, and then press the OK button.
4. Select
Startup Page, and then press the OK button.
5. Select
On or Off, and then press the OK button.
To Next Page
Loading...
Need help?
General
