Using the Address Book When Faxing
Phaser® 6180MFP Multifunction Printer
8-8
5. Press the OK button after selecting the recipients.
6. Press the Start button.
The printer starts the fax job.
Note: To stop a fax from sending, press the Stop button.
Faxing to a Group
Set up and save group names to easily access them when you want to send a fax to a group.
Groups can include both individual and group entries once they have been set up.
Note: Individual entries must be set up before groups can be defined.
This section includes:
■ Creating a Fax Group on page 8-8
■ Editing Address Book Fax Groups on page 8-9
■ Faxing to an Address Book Group on page 8-10
Creating a Fax Group
There are two ways to create group address book entries:
■ Using CentreWare IS to create the group (requires Ethernet connection)
■ Using the Address Book Editor (requires USB connection)
Using CentreWare IS to Create a Group
To create a fax group using CentreWare IS:
1. Launch your web browser.
2. Enter your printer’s IP address in the browser’s Address field.
3. Select the Address Book tab.
4. In the Address Book, under Fax Address Book, click Group Directory.
5. In the Directory Listing, click the Add button of any group that is not in use.
6. Type a group name, and then click the Save Changes button.
7. Click the Return button when you receive a “Request Acknowledged” message.
8. Click the Edit button for the group you created.
9. Select the check box of individuals that you want to be in the group.
Note: Use the Directory. List to links, found at the bottom of the screen, to see additional
Fax Address Book entries. You can also add existing groups to this group.
10. Click Save Changes when you have finished selecting group members.
The address book is saved on the printer with the new group.
To Next Page
Loading...
Need help?
General
