Loading Paper
Phaser® 6180MFP Multifunction Printer
5-10
Loading Paper
This section includes:
■ Loading Paper in Tray 1 (MPT) on page 5-10
■ Loading Paper in Trays 2 and 3 on page 5-13
Loading Paper in Tray 1 (MPT)
Use Tray 1 (MPT) for a wide range of media including:
■ Plain paper
■ Card stock
■ Labels
■ Envelopes
■ Transparencies
■ Glossy paper
■ Specialty media including business cards, postcards, trifold brochures, and weatherproof
paper
■ Pre-printed paper (paper already printed on one side)
■ Custom size paper
See also:
About Paper on page 5-6
Tray 1 video tutorial at www.xerox.com/office/6180MFPsupport
Loading Paper in Tray 1 (MPT)
In addition to plain paper, Tray 1 (MPT) can use various other sizes and types of print media,
such as envelopes and transparencies.
Make sure of the following points when loading paper in Tray 1 (MPT).
You can load up to 150 sheets or a stack of paper (65
– 220 g/m
2
, 17 – 40 lb. Bond, 40 – 80 lb.
Cover) less than 15 mm high. Sizes can start from 3 x 5”.
■ Tray 1 (MPT) accepts print media within the following dimensions:
■ Width: 76.2 – 216.0 mm (3 – 8.5 in.)
■ Length: 127.0 – 355.6 mm (5 – 14 in.)
■ You can load media that is 65 – 163 g/m
2
(17 – 43 lb. Bond) for duplex printing.
To Next Page
Loading...
Need help?
General
