Checking Page Counts
Phaser® 6180MFP Multifunction Printer
11-10
Checking Page Counts
The total number of printed pages can be checked at the control panel. Three meters are
available: Total Impressions, Color Impressions, and Black Impressions.
The billing meter counts the number of pages printed properly. Single side print (including
N-up) is counted as one impression, and 2-sided print (including N-up) is counted as two.
During duplex printing, if an error occurs after one side is printed properly, it is counted as
one.
When printing color data, that has been converted by using ICC profile on an application, with
the Color (Auto) setting, the data is printed by color even if it seems to be black and white data
on the monitor. In that case, Color Impressions is increased.
When doing 2-sided printing, a blank page may be inserted automatically depending on the
settings of the application. In this case, the blank page is counted as one page.
Use the following procedure to check a meter:
1. Press the System button.
2. Press either the Up Arrow or Down Arrow button until
Billing Meter is displayed, and
then press the Forward Arrow or OK button.
3. Press the Up Arrow or Down Arrow button until the desired meter is displayed.
To Next Page
Loading...
Need help?
General
