Secure Watermark
WorkCentre 7425/7428/7435
System Administrator Guide
85
Secure Watermark
This procedure enables the System Administrator to set parameters for the inclusion of a Secure
Watermark as the background for any documents that are copied or printed on this, or another
identical model machine.
Secure Watermark works with copy job, client print, folder print, media print, incoming fax prints and
reports.
You must purchase the Security option to enable this feature. Contact your Xerox representative to
purchase the option.
Secure Watermark configuration items include:
• Default Watermark Effect
• Default Watermark
•Font Size
•Background Pattern
• Date Format
•Font Color
•Density
• Watermark / Background Contrast
• Force Watermark – Copy Job
• Force Watermark – Client Print
• Force Watermark – Print Stored File
• Force Watermark – Media Print
• Custom Watermark 1
• Custom Watermark 2
• Custom Watermark 3
Configuring Secure Watermark
1. Press the Log In/Out button on the control panel.
2. Enter the System Administrator’s Login ID and Passcode if prompted (default admin, 1111), and
press Enter.
3. Press the Machine Status button.
4. Touch the Tools tab.
5. Touch System Settings.
6. Touch Common Service Settings.
7. Touch Watermark. If not visible, use the scrolling arrow in the Features column.
8. On the Watermark screen, in the Items column, touch the item to be configured, then touch
Change Settings. The screen for the item will open.
9. On the selected item screen, make your change and touch Save.
To Next Page
Loading...
Need help?
General
