Xerox WorkCentre 7970 User Manual

Copying
ID Card Copying
This section includes:
• Copying an ID Card ....................................................................................................................................................... 125
• Selecting Color or Black and White Copies ........................................................................................................... 126
• Reducing or Enlarging the Image ............................................................................................................................ 126
• Selecting the Paper Tray ............................................................................................................................................. 127
• Specifying the Original Type ..................................................................................................................................... 127
• Lightening or Darkening ID Card Copies .............................................................................................................. 127
• Automatically Suppressing Background Variation ............................................................................................ 128
Copying an ID Card
You can copy both sides of an ID card or small document onto one side of paper. Each side is copied using
the same location on the document glass. The printer stores both sides and prints them side by side on
the paper.
To copy an ID card:
1. Press the Services Home button, then touch ID Card Copy.
2. Touch the ID Card Copy tab.
3. Verify the output color, paper supply, and reduce/enlarge settings. Change the settings as needed.
4. Touch the Image Quality tab.
5. Verify the original type, lighten/darken, and background suppression settings for side 1. Change the
settings as needed.
6. Lift the document cover.
7. Place the ID card, or a document smaller than half the selected paper supply size, in the upper left
corner of the document glass.
8. Press the green Start button.
9. Lift the document cover.
10. Turn over the document and position it in the upper left corner of the document glass.
11. Verify the original type, lighten/darken, and background suppression settings for side 2. Change the
settings as needed.
12. Press the green Start button.
13. Lift the document cover and remove the ID card or document.
Xerox
®
WorkCentre
®
7970 Multifunction Printer 125
User Guide

Xerox WorkCentre 7970 Specifications

General

Brand	Xerox
Model	WorkCentre 7970
Category	All in One Printer
Language	English