Xerox WorkCentre 7970 User Manual

Paper and Media
Loading Paper
This section includes:
• Loading Paper in Trays 1–4 .......................................................................................................................................... 55
• Setting the Guide Locks in the 500-Sheet Adjustable Trays ............................................................................ 58
• Changing Paper Size, Type, and Color ..................................................................................................................... 59
• Loading Paper in Trays 3 and 4 of the Tandem Tray Module ........................................................................ 59
• Loading Paper in Tray 5 (Bypass Tray) .................................................................................................................... 61
• Loading Paper in Tray 6 (High-Capacity Feeder) ................................................................................................. 62
• Configuring Tray 6 in the High-Capacity Feeder ................................................................................................. 63
Loading Paper in Trays 1–4
1. Pull out the tray until it stops.
2. Ensure that the guide locks are set in the correct position for the standard or custom size paper you
are loading. For details, see Setting the Guide Locks in the 500-Sheet Adjustable Trays on page 58.
3. Remove any paper that is a different size or type.
4. Move the length and width guides out:
a. Pinch the guide lever on each guide.
b. Slide the guides outward until they stop.
c. Release the levers.
Xerox
®
WorkCentre
®
7970 Multifunction Printer 55
User Guide

Xerox WorkCentre 7970 Specifications

General

Brand	Xerox
Model	WorkCentre 7970
Category	All in One Printer
Language	English