Copying
Advanced Copying
This section includes:
• Building a Copy Job ....................................................................................................................................................... 129
• Printing a Sample Copy ............................................................................................................................................... 130
• Saving Copy Settings .................................................................................................................................................... 130
• Retrieving Saved Copy Settings ................................................................................................................................ 130
Building a Copy Job
Use this feature to produce complex copy jobs that include a variety of originals requiring different copy
settings. Each segment of the job can have different copy settings. Once all the segments are
programmed, scanned, and temporarily stored in the printer, the copy job prints.
To build a copy job with multiple segments:
1. Press the Services Home button, then touch Copy.
2. Program and scan the first segment:
a. Load the originals for the first segment.
b. Select the required settings, such as layout adjustments, image quality, and options.
c. Touch the Job Assembly tab, then touch Build Job>On.
d. Select or clear the Display this window between segments check box.
e. Touch Options.
f. Select or clear the Turn Build Job Off after Job is Submitted check box.
g. Touch OK.
h. Press the green Start button on the control panel.
3. Program and scan additional segments:
a. Load the originals for the next segment.
b. When the Build Job screen appears, touch Program Next Segment.
c. Using the appropriate tabs, select the required settings.
d. Press the green Start button to scan the originals for that segment.
4. Repeat the previous step for each remaining segment.
5. Touch the Quantity for Final Job field, then use the alphanumeric keypad to enter the number of
copies.
6. In the upper right corner of the Build Job screen, touch Submit Job.
Note: To cancel the job, touch Delete All Segments.
Xerox
®
WorkCentre
®
7970 Multifunction Printer 129
User Guide
To Next Page
Loading...
Need help?
General
