The following defines the symbols used in this manual to indicate varying degrees of
safety precautions and to identify the corresponding level of hazard inherent to each.
Failure to follow precautions provided in this manual can result in serious, possibly even
fatal, injury, and/or damage to the persons, products, or related equipment and systems.
Indicates a potentially hazardous situation, which, if not heeded,
could result in death or serious injury
Indicates a potentially hazardous situation, which, if not avoided,
may result in minor or moderate injury.
Checking Products upon Delivery
1. DO NOT install any drive which is damaged, lack of accessories or not the same with
the model ordered.
Doing so may result in electric shock.
1. Cut off external power supply before installation.
Not doing so may result in electric shock.
1. Always use the servomotor and servo amplifier in one of the specified combinations.
Never use the products in an environment subject to water, corrosive gases,
inflammable gases, or combustibles.
Doing so may result in electric shock, fire or malfunction.
2. DO NOT touch any metallic part.
Doing so may result in malfunction.
1. Cut off external power supply before wiring.
Not doing so may result in electric shock.
2. Connect AC power supply to the corresponding terminals.
Faulty wiring may result in fire.
Be sure to review this section carefully before use this product. In precondition of
security, wire the product correctly.
To Next Page
Loading...
Need help?
General
