Smart Video
___________________________________________________________________________________________________________________________
If the scenery of this planned riding route is beautiful, but the route has
continuous, more difficult and steep uphill, then it will be difficult to be
distracted by manual recording while paying attention to sprint forward with
climbing uphill. Therefore, it is recommended to use the Smart Video function
that takes the preset Heart Rate / Climbing Uphill Speed / Cadence, and other
conditions into account while you enjoying the ride, and let X5 to help you
recording your video automatically! To configure the setting, do the following:
1. Enter Quick Access Menu. Tap
and select [Device Settings].
2. Tap [Smart Video].
3. Tap [Auto REC] and set the
switch to ON to enable the Auto
Video Recording (Auto REC)
function.
4. Configure the necessary settings
that will be used to trigger the
Auto REC function.
For example, [Speed] option will
be used to trigger the recording.
Select [Speed] and set the switch
to “ON” to activate the function.
Then enter the target speed (in
km/h).
5. If the value you entered is too low,
it will trigger video recording
continuously and the memory
space will be reduced rapidly.
When the system detects the
value is too low that might cause
continuous video recording
condition, a confirmation
message will appear, asking you
to reconfirm. Please verify if the
value is correct, then press [Save]
to save the setting, or tap [Edit] to
enter the value again.
6. The available options are:
￭HR (Heart Rate) - Start the video
recording when the Heart Rate is
To Next Page
Loading...
Need help?
General