Initial Power-up Setting
___________________________________________________________________________________________________________________________
1. Charging the Xplova X5: Before
using your Xplova X5, please
make sure it is fully charged using
the Micro-USB cable. To charge
your X5, simply plug the USB
cable to the port on the back of
X5.
*Note: Before using your device
for the first time, charge your X5
for at least 5 hours to ensure the
built-in battery is fully charged. If
using 5V1A charger, the charging
time may take approximately 3
hours.
2. Installing SIM Card: If you would
like to connect X5 with the
Internet using 3G, you must insert
a 3G SIM Card into its slot on X5
(at the location #4 on the previous
page of Product Overview).
3. Powering On: If the device has
sufficient power or in charging
mode, long press the [Power]
button until the power-up screen
is displayed.
4. Language Selection: After the
Welcome screen appears, select
your desired language.
5. Time Zone Selection: It is
recommended to keep the default
setting [Set Automatically] in
which it will automatically use
GPS to locate your current time
zone.
6. Unit Selection: Select the
calculation unit [Metric] or
[Statute].
To Next Page
Loading...
Need help?
General