Page 28
F
T-991
OperaTing Manual
optional fh-2 reMote control switches
With the optional remote control keypad
FH-2
, you can record and transmit your voice (Voice Memory) and control the
Contest Memory Keyer during CW operation.
m
On SSB/AM/FM modes, ve channels of storage and playback of voice memory (20 seconds each), using your own
voice for recording (see page 68).
m
For the CW Memory Keyer, 5 channels are available for each of the MESSAGE Memory and the TEXT Memory (see
page 84).
Voice Memory: 5 Memory Channels for
the Memory Keyer
In the case of Voice Memory, up to 20 seconds of
audio may be stored on each channel.
“MESSAGE Memory” and “TEXT Memory” are
available for the Contest Memory Keyer.
Each “MESSAGE Memory” channel is capable
of retaining a 50-character CW message using the
PARIS standard for characters and word length.
Each “TEXT Memory” channel is capable of retain-
ing a maximum of 50 characters.
Cursor Buttons
When programming the Contest Memory Keyer,
these buttons are used to move the cursor and select
the text characters.
The cursor may be moved in 4 different directions
(up/down/right/left).
Usually, these buttons are used for tuning the VFO
frequency. Press the [
p
]/[
q
] buttons to change the
frequency in the same increments as the microphone
[
UP
]/[
DWN
] switches. Press the [
t
]/[
] buttons to
change the frequency by 100 kHz steps.
[
P/B
]
Button
When entering text, a space may be inserted where
the cursor is ashing.
[
LOCK
]
Button
The
FH-2
key buttons may be locked by setting this
switch to “ON”.
[
MEM
]
Button
Press this button to store either a Voice Memory, or a
Contest Keyer Memory.
[
DEC
]
Button
When utilizing the sequential contest number ca-
pability of the Contest Keyer, press this button to
decrement (decrease) the current Contest Number by
one digit (i.e. to back up from #198 to #197, etc.).
4
3
2
1
5
6
To Next Page
Loading...
Need help?
General
