Page 7
F
T-991
OperaTing Manual
bASe StAtion Wire StAnd
The heavy wire stand on the bottom of the transceiver allows the transceiver to be tilted upward for better viewing. Sim-
ply fold the stand forward to raise the front of the transceiver, and fold it back against the bottom case to lower the front
of the
FT-991
.
AdjuSting the MAin tuning diAl torque
The torque (drag) of the Main Tuning Dial knob may be adjusted according to your preferences. Rotate the skirt at the
base of the knob clockwise to reduce the drag, or counter-clockwise to increase the drag.
Skirt
before You beGin
To Next Page
Loading...
