To Next Page

To Previous Page

10-11

MNT

Maintenance

2. Apply corrosion resistant grease to the

specified area.

Checking the propeller

1. Check the propeller. See “Checking the

propeller” (8-4).

Checking the spark plug

1. Check the spark plug. See “Checking the

spark plug” (7-35).

Checking the spark plug cap

1. Check the spark plug cap. See “Checking

the spark plug cap” (5-5).

Checking the thermostat

1. Check the thermostat. See “Checking the

thermostat” (7-35).

Adjusting the throttle link rod and

throttle cable

1. Adjust the throttle link rod. See “Adjusting

the throttle cable and throttle link” (6-14).

Checking the top cowling

1. Check the fitting by pushing the top cowl-

ing. Adjust if there is free play.

2. Loosen the bolts a.

3. Move the hook b up or down slightly to

adjust its position.

TIP:

• To loosen the fitting, move the hook in

direction a.

• To tighten the fitting, move the hook in

direction b.

4. Tighten the bolts a.

5. Recheck the fitting. Replace the cowling

seal if the free play cannot be adjusted.

Checking the valve clearance

1. Check the valve clearance. See “Check-

ing the valve clearance” (7-2).

Yamaha F6C Service Manual

Other manuals for Yamaha F6C