Yamaha HTR-6030 Service Manual

RX-V361/HTR-6030/DSP-AX361
36
RX-V361/HTR-6030/
DSP-AX361
17. SOFTSWITCH17. SOFT SWITCH
P.C.B.上の機能設定をソフト的に切り替えて、本機を
動作させる機能です。
プロテクション機能は、P.C.B.の設定に従います。
※ 開発用メニューのため、詳細に関しては記載できま
せん。
This menu is used to switch the function settings on
P.C.B. through the software to activate the main unit.
The protection function follows the P.C.B. settings.
* As this is a development menu, it is not possible to
describe the details.
注） 開発用メニューのため、機能設定の変更は行わな
いでください。
機能設定を変更した場合、正常に動作しないこと
があります。
Note) As this is a development menu, do not change
the function setting.
Changing the function setting may hinder the
proper operation.
Switch mode
Model
Destination
Tuner destination
VIDEO format
AAC
OSD
YPAO
RDS
XM
DAB
USB
DOCK (iPod)
17.MODE:PCB
17.MODEL:361
17.DEST : UC
17.TUNER: UC
17.VIDEO:NTSC
17.AAC : NOT
17.OSD : NOT
17.YPAO: NOT
17.RDS : NOT
17.XM : NOT
17.DAB : NOT
17.USB : NOT
17.DOCK: NOT

Yamaha HTR-6030 Specifications

General

Channels	5.1
HDMI Outputs	1
Dolby Digital	Yes
DTS	Yes
FM/AM Tuner	Yes
Response Bandwidth	10 Hz - 100 kHz
Signal-To-Noise Ratio	100 dB
Total Harmonic Distortion	0.9%
Input Impedance	47 kOhm
Input Sensitivity	200 mV
Audio D/A Converter	192kHz/24-bit
Surround Sound Effects	Yes
Surround System Class	5.1 channel
Digital Sound Processor (DSP)	Yes
DSP Preset Qty	14
Tuner Bands	FM/AM
Preset Station Qty	40
Frequency Response	10 Hz - 100 kHz
Power Output	100 W per channel
Built-in Decoders	Dolby Digital, DTS
Connector Type	Headphones, Composite video/audio input/output
Video Inputs/Outputs	composite video / audio input, composite video / audio output, HDMI input, HDMI output
Audio Inputs/Outputs	2 Optical digital inputs, 1 Coaxial digital input