Yealink CP860 User Manual

Using Your Phone with SIP/Cloud Account
99
 Bridged Line Appearance (BLA)
 Messages
 Using PC or Mobile Device with the Conference Phone
If you require additional information or assistance with your new phone, contact your system
administrator.
Recording Using a USB Flash Drive
Call and Conference Recording
You can insert a USB flash drive into the USB port on your phone to manually record active calls
and conferences, or automatically record once the call is set up. Recordings are stored in *.wav
format. The filenames include a date & time stamp and the other party’s number/IP
address/name (or the first person’s number/IP address/name you called), for example,
20161123-1630-1011 was created on November 23, 2016, at 16:30 and you have a call with
1011.
Note
When your phone is idle, and you insert a USB flash drive into the USB port on your phone, the
phone will detect the USB flash drive and display the prompt message “USB Inserted” and the
icon .
If the phone detects the USB flash drive successfully, the icon will display on the idle screen.
Note
The Start REC soft key controls the recording function, and is available:
 When there are one or more calls connected to your phone
Before recording any call, especially those involving PSTN, it is necessary to know about the rules
and restrictions of any governing call-recording in the place where you are. It is also very
important to have the consent of the person you are calling before recording the conversation.
Recording feature is not available by default. For more information, contact your system
administrator.
The size of a single recording file should be less than 2G.

Yealink CP860 Specifications

General

Speakerphone	Yes
Voice codecs	G.711, G.722, G.729ab, iLBC
Handset type	-
Product type	IP Phone
Product color	Black
Display resolution	192 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	1
Networking standards	IEEE 802.1x, IEEE 802.3af
Supported network protocols	IPv4/IPv6
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC adapter input voltage	100 - 240 V
AC adapter output current	2 A
AC adapter output voltage	5 V
Number of handles included	- pc(s)
Storage temperature (T-T)	10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	260 mm
Width	320 mm
Height	52 mm