Yealink CP860 User Manual

Using Your Phone with SIP/Cloud Account
81
Do Not Disturb (DND)
You can use DND to reject incoming calls automatically on the phone. The prompt message "n
New Missed Call(s)" ("n" indicates the number of missed calls, e.g., 1 New Missed Call(s)) will
appear on the LCD screen, and callers will receive a busy message. All calls you receive while
DND is activated are logged to your missed calls list.
Note
When DND feature is activated, the IP phone supports displaying a large DND icon on the idle
screen. For more information, contact your system administrator.
To activate DND via phone user interface:
1. Press the DND soft key when the phone is idle.
The icon appears on the status bar.
Note
DND is configurable via web user interface at the path Features->Forward&DND.
To configure the DND authorized numbers via web user interface:
1. Click on Features->Forward&DND.
2. Select Enabled from the pull-down list of DND Emergency.
3. Enter the numbers in the DND Authorized Numbers field.
The prompt message will display only if Missed Call Log is enabled. Missed call log is
configurable via web user interface at the path Account->Basic.
Do not disturb is local to the phone, and may be overridden by the server settings. For more
information, contact your system administrator.
When DND and busy forward are activated, calls will be sent to the configured destination
number. For more information on busy forward, refer to Call Forward on page 82.

Yealink CP860 Specifications

General

Speakerphone	Yes
Voice codecs	G.711, G.722, G.729ab, iLBC
Handset type	-
Product type	IP Phone
Product color	Black
Display resolution	192 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	1
Networking standards	IEEE 802.1x, IEEE 802.3af
Supported network protocols	IPv4/IPv6
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC adapter input voltage	100 - 240 V
AC adapter output current	2 A
AC adapter output voltage	5 V
Number of handles included	- pc(s)
Storage temperature (T-T)	10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	260 mm
Width	320 mm
Height	52 mm