Yealink CP860 User Manual

User Guide for the CP860 HD IP Conference Phone
74
Ending Calls
To end a call:
Do one of the following:
- Press the EndCall soft key.
- Press .
Note
Redialing Numbers
To redial the last dialed number from your phone:
1. Press twice.
A call to your last dialed number is attempted.
To redial a previously dialed number from your phone:
1. Press when the phone is idle.
2. Press or to select the desired entry from the placed calls list, and then
press , , or the Send soft key.
Recent Call In Dialing
To view the placed calls list when the phone is on the dialing screen, you should enable recent
call in dialing in advance.
To enable recent call in dialing via web user interface:
1. Click on Directory->Setting.
To end a call placed on hold, you can press the EndCall soft key to end the call directly, or press
the Resume soft key to resume the call before ending it.

Yealink CP860 Specifications

General

Speakerphone	Yes
Voice codecs	G.711, G.722, G.729ab, iLBC
Handset type	-
Product type	IP Phone
Product color	Black
Display resolution	192 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	1
Networking standards	IEEE 802.1x, IEEE 802.3af
Supported network protocols	IPv4/IPv6
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC adapter input voltage	100 - 240 V
AC adapter output current	2 A
AC adapter output voltage	5 V
Number of handles included	- pc(s)
Storage temperature (T-T)	10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	260 mm
Width	320 mm
Height	52 mm