Overview
5
LED Instructions
LED indicators on the CP860 IP conference phone and Mute indicator LED on the CPE80
expansion microphone (optional):
The phone is initializing (This LED status is only
applicable to CP860 IP conference phone).
The call is muted.
The phone places a call.
There is an active call on the phone.
The call is placed on hold or is held.
The phone is powered off.
The phone is idle.
User Interfaces
Two ways to customize configurations of your CP860 IP conference phone:
The user interface on the IP phone.
The user interface in a web browser on your PC.
The hardware components keypad and LCD screen constitute the phone user interface, which
allows the user to execute all call operation tasks and basic configuration changes directly on
the phone. In addition, you can use the web user interface to access all configuration settings. In
many cases, it is possible to use either the phone user interface and/or the web user interface
interchangeably. However, in some cases, it is only possible to use one or the other interface to
operate the phone and change settings.