Yealink CP860 User Manual

Using Your Phone with SIP/Cloud Account
125
You can also delete all text messages by pressing the Delete soft key and then select Delete All.
For more information, refer to the above steps.
Note
Voice Mail
You can leave voice mails for someone else using the CP860 IP conference phone. You can also
listen to voice mails that are stored in voice mailbox. When receiving a new voice mail, the
phone will play a warning tone. The LCD screen will prompt “n New Voice Mail(s)” (“n” indicates
the number of unread voice messages, e.g., 89 New Voice Mail(s)) and display an icon .
If the voice mail pop-up message box disappears, it won't pop up again unless the user receives
a new voice mail or the user re-registers the account that has unread voice mail(s).
Note
To leave a voice mail:
You can leave a voice mail for someone else when he/she is busy or inconvenient to answer the
call. Follow the voice prompt from the system server to leave a voice mail, and then hang up.
To configure voice mail access codes via phone user interface:
1. Press Menu->Message->Voice Mail->Set Voice Mail Code.
2. Press the 123 soft key to select the proper input mode and then enter the voice mail access
code (e.g., *88).
3. Press the Save soft key to accept the change or the Back soft key to cancel.
Note
Voice Mail is not available on all servers.
You can configure the phone not to display the pop-up prompt, contact your system
administrator for more information.
Voice mail access codes must be predefined on the system server. Contact your system
administrator for the more information.
You can also delete a specific message after retrieving by pressing the Delete soft key.

Yealink CP860 Specifications

General

Speakerphone	Yes
Voice codecs	G.711, G.722, G.729ab, iLBC
Handset type	-
Product type	IP Phone
Product color	Black
Display resolution	192 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	1
Networking standards	IEEE 802.1x, IEEE 802.3af
Supported network protocols	IPv4/IPv6
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC adapter input voltage	100 - 240 V
AC adapter output current	2 A
AC adapter output voltage	5 V
Number of handles included	- pc(s)
Storage temperature (T-T)	10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	260 mm
Width	320 mm
Height	52 mm