Yealink CP860 User Manual

User Guide for the CP860 HD IP Conference Phone
132
Default Account
To configure the default account via phone user interface:
1. Press Menu->Settings->Advanced Settings (default password: admin) ->Accounts.
2. Press or to select the desired account.
3. Press the Default soft key.
Selecting the Country for PSTN Use
To select the country which your phone operates in via phone user interface:
1. Press Menu->Settings->Basic Settings->Country.
2. Press or to select the desired country.
3. Press the Save soft key to accept the change.
You can configure the flash time to adjust the length of time before a hook flash times out (or
the call disconnects).
Flash time can be configured from the following options:
 Auto: It depends on the country that is configured for the phone (refer to Selecting the
Country for PSTN Use). The flash time is automatically set for that country.
 75msec, 100msec, 300msec or 600msec: The hook flash times out after the designated
time (in milliseconds).
To configure flash time via phone user interface:
1. Press Menu->Settings->Advanced Settings (default password: admin) ->Flash Time.

Yealink CP860 Specifications

General

Speakerphone	Yes
Voice codecs	G.711, G.722, G.729ab, iLBC
Handset type	-
Product type	IP Phone
Product color	Black
Display resolution	192 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	1
Networking standards	IEEE 802.1x, IEEE 802.3af
Supported network protocols	IPv4/IPv6
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC adapter input voltage	100 - 240 V
AC adapter output current	2 A
AC adapter output voltage	5 V
Number of handles included	- pc(s)
Storage temperature (T-T)	10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	260 mm
Width	320 mm
Height	52 mm