EasyManuals Logo

Yealink CP860 User Manual

Yealink CP860
172 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
Customizing Your Phone
25
2. Enter the starting time and ending time respectively in the desired day field.
3. Click Confirm to accept the change.
Configuring the Idle Timeout
Idle Timeout specifies the period of time before the IP phone enters power-saving mode. The
following three types of idle timeout you can configure:
Office Hours Idle TimeOut: Configures the idle timeout for office hours.
Off Hours Idle TimeOut: Configures the idle timeout for non-office hours.
User Input Extension Idle TimeOut: Configures idle timeout that applies after you use
the IP phone (for example, press a key on the phone).
By default, the Office Hours Idle Timeout is much longer than the Off Hours Idle TimeOut. If you
use the IP phone, the idle timeout that applies (User Input Extension Idle TimeOut or Office
Hours/Off Hours Idle TimeOut) is the timeout with the highest value. If the phone has an
incoming call or new message, the User Input Extension Idle TimeOut is ignored.
To configure the idle timeout via web user interface:
1. Click on Settings->Power Saving.
2. Enter the desired value in the Office Hours Idle TimeOut field.
The default value is 960, you can set to 1-960.
3. Enter the desired value in the Off Hours Idle TimeOut field.
The default value is 10, you can set to 1-10.
4. Enter the desired value in the User Input Extension Idle TimeOut field.

Table of Contents

Other manuals for Yealink CP860

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink CP860 and is the answer not in the manual?

Yealink CP860 Specifications

General IconGeneral
SpeakerphoneYes
Voice codecsG.711, G.722, G.729ab, iLBC
Handset type-
Product typeIP Phone
Product colorBlack
Display resolution192 x 64 pixels
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts1
Networking standardsIEEE 802.1x, IEEE 802.3af
Supported network protocolsIPv4/IPv6
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC adapter input voltage100 - 240 V
AC adapter output current2 A
AC adapter output voltage5 V
Number of handles included- pc(s)
Storage temperature (T-T)10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Weight and Dimensions IconWeight and Dimensions
Depth260 mm
Width320 mm
Height52 mm

Related product manuals