Customizing Your Phone
31
or on-hook key.
Note
To activate the phone lock via phone user interface:
1. Press Menu->Settings->Basic Settings->Phone Lock.
2. Enter the desired PIN (default PIN: 123) in the Unlock PIN field, and then press the OK soft
key.
3. Press the or soft key to select Enabled from the Lock Enable field.
4. Press the or soft key to select the desired type from the Lock Type field.
5. Enter the desired interval of automatic phone lock in the Lock Time Out field.
The default timeout is 0. It means the phone will not be automatically locked. You need to
long press to lock it immediately when the phone is idle.
If it is set to other values except 0 (e.g., 5), the phone will be locked when the phone is
inactive in idle screen for the designated time (in seconds).
6. Press the Save soft key to accept the change.
When the phone is locked, the LCD screen prompts “Phone locked.” and displays the
icon .
To change the phone unlock PIN via phone user interface:
1. Press Menu->Settings->Basic Settings->Change PIN.
2. Enter the desired value in the Old PIN, New PIN and Confirm PIN field respectively.
3. Press the Save soft key to accept the setting or the Back soft key to cancel.
Note
The emergency number setting, if desired, must be made before lock activation. For more
information, refer to Emergency Number on page 67.
The unlock PIN length must be within 15 digits.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
