User Guide for the CP920 HD IP Conference Phone
94
2. Make sure you have an active PSTN account (refer to Using Your Phone with PSTN
Account).
3. Do the following to place a mobile call over Bluetooth on the IP phone.
Tap .
Tap the Switch soft key to choose the Mobile Account.
Enter the desired number.
Tap , , or the Send soft key.
4. Placing an IP call.
5. Placing a PSTN call.
6. Tap the Conf soft key.
The hybrid UC conference is created.
Managing the Conference
During the conference call, you can do the following:
- Tap the Hold soft key to place the conference on hold.
- Tap the Conf soft key to join more parties in an established conference call.
- Tap the Manage soft key, and then tap or to select the desired party:
Tap the Far Mute soft key to mute the party. The muted party can hear everyone, but
no one can hear the muted party.
Tap the Remove soft key to remove the selected party from the conference call.
Tap the Split All soft key to split the conference call into individual calls on hold.
Tap the Back soft key to return to the previous screen.
- Tap to mute the conference call, all other participants can hear each other, but they
cannot hear you.
- Tap or the End Call soft key to drop the conference call.
Network Conference
You can use network conference on the CP920 IP conference phone to conduct a conference
with multiple participants.
This feature allows you to perform the following:
To Next Page
Loading...
Need help?
General
Weight and Dimensions
