Customizing Your Phone
27
Customizing Your Phone
You can customize your CP920 IP conference phone by personally configuring certain settings,
for example, backlight, time & date and ring tones. You can add contacts to the phone’s local
directory manually or from call history. You can also personalize different ring tones for
different callers.
This chapter provides basic operating instructions for customizing your phone. Topics include:
General Settings
Audio Settings
Contact Management
Call History Management
Search Source List in Dialing
System Customizations
If you require additional information or assistance with your new phone, contact your system
administrator.
General Settings
Power Saving
The power saving feature is used to turn off the backlight to conserve energy. The IP phone
enters power-saving mode after it has been idle for a certain period of time.
The IP phone will exit power-saving mode if one of the following phone events occurs:
Tap any key.
There is an incoming call.
A new prompt (e.g., missed call, new voice mail or forwarded call).
You can configure the following power-saving settings:
Office Hour
Idle Timeout (minutes)
The office hour and idle timeout (minutes) settings work only if the power saving feature is
enabled.
Note
Power saving is configurable via web user interface only.