Yealink CP920 User Manual

User Guide for the CP920 HD IP Conference Phone
134
- Tap Menu->Setting->Basic Settings->Bluetooth.
2. Tap Switch soft key to select Off from the Bluetooth field.
3. Tap the Save soft key.
The Bluetooth icon disappears from the status bar.
Bluetooth mode is configurable via web user interface at the path Features->Bluetooth.
Pairing and Connecting the Bluetooth-Enabled Mobile
Phone
You can pair up to countless mobile phones with your IP phone; however, only one mobile
phone can be connected at a time.
Before you pair a mobile phone, check the Bluetooth mode on the mobile phone to make sure
that the mobile phone is discoverable.
To pair and connect the Bluetooth-Enabled Mobile Phone with your IP phone:
1. Activate the Bluetooth mode.
2. Tap the Scan soft key to scan the available Bluetooth device automatically.
3. Select the desired mobile phone.
4. Tap Connect soft key to connect the mobile phone to your IP phone..
The prompt “Connecting…” appears the screen.
The IP phone will prompt the connect passkey on the LCD screen, as shown below:

Yealink CP920 Specifications

General

Control type	Buttons
Display type	LCD
Product type	IP conference phone
Voice codecs	CNG, G.722, G.722.1C, G.723, G.726, OPUS, VAD, iLBC
Certification	CE
Product color	Stainless steel
Built-in display	Yes
Display diagonal	3.1 \
Display resolution	248 x 120 pixels
Phonebook capacity	1000 entries
Security algorithms	HTTPS
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet interface type	Fast Ethernet
Microphone direction type	Omnidirectional
AC input voltage	100 - 240 V
USB version	2.0
Storage temperature (T-T)	-10 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	298 mm
Width	307.8 mm
Height	66.9 mm
Package depth	364 mm
Package width	336 mm
Package height	112 mm