Yealink CP920 User Manual

Customizing Your Phone
45
2. Select Local Directory.
If Local Directory is removed from the directory (refer to Directory on page 41), tap
Menu->Directory->Local Directory to enter the local directory.
3. Select the desired contact group and then tap the Enter soft key.
If the contact is not in any group, select All Contacts and then tap the Enter soft key.
4. Tap the Add soft key.
5. Enter the name and the office, mobile or other numbers in the corresponding fields.
6. Tap the or soft key to select the desired ring tone from the Ring field.
If Auto is selected, this contact will use the ring tone according to the priority: Group ring
tone (refer to Adding Groups) >Account ring tone (refer to Ring Tones)>Phone ring tone
(refer to Ring Tones).
7. Tap the or soft key to select the desired group from the Group field.
8. Tap the Add soft key to accept the change or the Back soft key to cancel.
Note
Adding Contacts from Call History
To add a contact to the local directory from call history:
1. Tap the History soft key.
2. Select the desired call history list and then tap the Enter soft key.
3. Tap or to highlight the desired entry.
If the contact already exists in the directory, the LCD screen will prompt “Contact name existed!”.

Yealink CP920 Specifications

General

Control type	Buttons
Display type	LCD
Product type	IP conference phone
Voice codecs	CNG, G.722, G.722.1C, G.723, G.726, OPUS, VAD, iLBC
Certification	CE
Product color	Stainless steel
Built-in display	Yes
Display diagonal	3.1 \
Display resolution	248 x 120 pixels
Phonebook capacity	1000 entries
Security algorithms	HTTPS
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet interface type	Fast Ethernet
Microphone direction type	Omnidirectional
AC input voltage	100 - 240 V
USB version	2.0
Storage temperature (T-T)	-10 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	298 mm
Width	307.8 mm
Height	66.9 mm
Package depth	364 mm
Package width	336 mm
Package height	112 mm