Yealink SIP-T46S User Manual

Basic Call Features
129
2. Select a desired account.
3. Select Enabled from the DND Status field.
On the SIP-T48S/T48G IP phone, tap On radio box of the DND Status field.
4. (Optional.) Enter the DND on code or off code respectively in the On Code or Off Code
field.
If the on code or off code is configured, the IP phone will send the corresponding code to
activate or deactivate DND on the server. It is not available on all servers.
5. Press Save.
If you want to activate DND for all accounts, you can press the All On soft key.
When you activate DND for the default account, the following occurs:
 On the SIP-T48S/T48G IP phone, the associated line icon changes to , and the icon
appears on the status bar.
 On the SIP-T46S/T46G IP phone, the associated line icon changes to , and the icon
appears on the status bar.
 On the SIP-T42S/T42G/T41S/T41P IP phone, the associated line icon changes to , and
the icon appears on the status bar.
 On SIP-T40G/T40P IP phone, the associated line icon changes to , and the icon
appears on the status bar.
When you activate DND for the non-default account, the following occurs:
 On the SIP-T48S/T48G IP phone, only the associated line icon will change to .
 On the SIP-T46S/T46G IP phone, only the associated line icon will change to .
 On the SIP-T42S/T42G/T41S/T41P IP phone, only the associated line icon will change
to .
 On the SIP-T40G/T40P IP phone, only the associated line icon will change to .
When you activate DND for all accounts, the following occurs:
 On the SIP-T48S/T48G IP phone, all line icons changes to , and the icon appears
on the status bar.
 On the SIP-T46S/T46G IP phone, all line icons changes to , and the icon appears on
the status bar.
 On the SIP-T42S/T42G/T41S/T41P IP phone, all line icons changes to , and the icon
appears on the status bar.
 On the SIP-T40G/T40P IP phone, all line icons changes to , and the icon appears on
the status bar.
Note
When DND and busy forward are activated for a specific account, incoming calls will be
forwarded from this specific account to the configured destination number. For more
information on busy forward, refer to Call Forward.
Downloaded from ManualsNet.com search engine

Yealink SIP-T46S Specifications

General

Manual	Yes
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Voice codecs	CNG, G.711Mu, G.711a, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Lines quantity	16 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	16
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
AC adapter input voltage	100 - 240 V
AC adapter output current	2 A
AC adapter output voltage	5 V
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Volume control	Digital
Number of programmable keys	10
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	SIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	213 mm
Width	244 mm
Height	185 mm
Package depth	255 mm
Package width	274 mm
Package height	128 mm