Yealink SIP-T46S User Manual

Advanced Phone Features
177
Intercom Allow
Intercom Allow allows the IP phone to automatically answer an incoming intercom call. If you
disable this feature, the IP phone will handle an incoming intercom call like a normal incoming
call. Intercom Allow is enabled by default.
Note
Intercom Mute
Intercom Mute allows the IP phone to mute the microphone for incoming intercom calls.
Intercom Mute is disabled by default.
Intercom Tone
Intercom Tone allows the IP phone to play a warning tone before answering an intercom call.
Intercom Tone is enabled by default.
Intercom Barge
Intercom Barge allows the IP phone to automatically answer an incoming intercom call while an
active call is in progress. The active call will be placed on hold. If you disable this feature, the IP
phone will handle an incoming intercom call like a normal incoming call while there is already an
active call on the IP phone. Intercom Barge is disabled by default.
Note
Procedure:
1. Navigate to Menu->Features->Intercom.
2. Make the desired changes.
3. Press Save.
Intercom features are configurable via web user interface at the path Features->Intercom.
To enable the phone to receive a new incoming call when it has an active call, make sure that call
waiting feature is enabled on the phone in advance. For more information, refer to Configuring
the Call Waiting.
Your administrator can set a period of delay time before the phone automatically answers
intercom calls.
Downloaded from ManualsNet.com search engine

Yealink SIP-T46S Specifications

General

Manual	Yes
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Voice codecs	CNG, G.711Mu, G.711a, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Lines quantity	16 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	16
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
AC adapter input voltage	100 - 240 V
AC adapter output current	2 A
AC adapter output voltage	5 V
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Volume control	Digital
Number of programmable keys	10
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	SIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	213 mm
Width	244 mm
Height	185 mm
Package depth	255 mm
Package width	274 mm
Package height	128 mm