User Guide for Yealink VC110 Video Conferencing Endpoint
52
Date & Time
The time and date are displayed on the LCD screen of the video conferencing phone and display
device. You can configure the endpoint to obtain the time and date from the SNTP (Simple
Network Time Protocol) server automatically. The SNTP allows the endpoint to synchronize time
to a main server. This keeps all network machine clocks on the same time. Enter the NTP Server
name that you want to follow.
If the phone cannot take the time and date from the SNTP server, you can configure the time
and date manually, or contact your system administrator for more information.
There are 7 available date formats. For example, for the date format “WWW DD MMM”, “WWW”
represents the abbreviation of week. “DD” represents the two-digit day, and “MMM” represents
the first three letters of the month.
The available date formats you need to know are:
To configure the NTP server and date & time format via the remote control:
1. Press (Menu soft key) to enter main menu.
2. Press or to select the Basic menu.
3. Press or to scroll to Date & Time, and then press .
4. Select the desired time format from the pull-down list of Time.
5. Select the desired date format from the pull-down list of Date.
6. Select SNTP Settings from the pull-down list of Time Type.
7. Select the time zone that applies to your area from the pull-down list of Time Zone.
The default time zone is "+8 China(Beijing)".
8. Enter the domain names or IP addresses in the NTP Primary Server and NTP Secondary
Server fields respectively.
9. Select the desired value from the Daylight Saving Time field.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
