Yealink VC110 User Manual

Using the VC110 Video Conferencing Endpoint
85
Using the VC110 Video Conferencing Endpoint
The VC110 video conferencing endpoint can be used to place calls, answer calls, or conduct a
conference cal. You can change layout, record videos or capture screenshots during a call.
This chapter provides basic operating instructions for the VC110 video conferencing endpoint.
Topics include:
 Account Polling
 Placing Calls
 Answering or Rejecting Calls
 Call Management
 Ending Calls
If you require additional information or assistance with your new phone, contact your system
administrator.
Account Polling
When you dial account numbers of other endpoint, account polling feature enables your
endpoint to use different call types according to this priority: Cloud platform>H.323
account>SIP account. If you cannot call other endpoints using all your registered accounts, then
this call fails.
Account polling is disabled by default. When you register multiple accounts (greater than or
equal to 2) for your endpoint, you can enable account polling feature. You can configure
account polling feature via web user interface only.
The following example shows the way calls are placed when account polling is enabled or
disabled
Scenario:
1. Endpoint A is registered with a Yealink Cloud account and a SIP account.

Yealink VC110 Specifications

General

Digital zoom	4 x
Focus adjustment	Auto
Video codecs	H.264, H.263
Maximum frame rate	30 fps
Supported video modes	720p, 1080p
Video formats supported	H.263, H.264
Supported graphics resolutions	352 x 288, 704 x 576, 1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Voice codecs	G.711a, G.722, G.722.1, G.722.1C
Line-in	Yes
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Pan range	-100 - 100 °
Tilt angle range	-30 - 30 °
Security algorithms	128-bit AES, HTTPS, SRTP, SSL/TLS
Ethernet LAN data rates	10, 100 Mbit/s
Supported network protocols	TCP/IP (IPv4), DHCP/ stastic IP, HTTP/ HTTPS, SRTP/TLS, IEEE802.1X, LLDP-MED, VLAN
Current	2 A
Power consumption (max)	30 W
Power consumption (typical)	24 W
Storage temperature (T-T)	-20 - 50 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	151.5 mm
Width	234.6 mm
Height	161 mm
Package depth	318 mm
Package width	432 mm
Package height	274 mm
Package weight	5900 g