Yealink W56H User Manual

| Headsets Registration | 43
Registering a New Headset to a Base Station
Procedure
1. Put the W70B into registering mode.
2. Hold the Call Control button for 3 seconds to power off the headset.
3. Hold the Call Control button for 5 seconds to power on the headset, and then it will enter the
registration mode automatically. You can see the Call Control button flashes blue and hear the voice
prompt announcing “Power on > Pairing mode”.
After the headset and W70B are all in the registration mode, the headset will automatically register to
the W70B. When the Call Control button flashes blue, and the voice prompts “Headset connected”, it
means the headset register to the W70B successfully.
Pairing the Headset with a Handset
You can also pair the headset with a handset registered on the same W70B. The headset will get the same
extension number as the handset.
About this task
Please ensure that you have registered the headset and the handset to the W70B. For more information
about registering handsets, please refer to Registering the Handset.
Procedure
On the web user interface, go to Account > Number > Assignment. Check the account you want to share
with the handset.

Yealink W56H Specifications

General

Type	DECT telephone handset
Speakerphone	Yes
Compatibility	Yealink W56P
Number of melodies	9
Phonebook capacity	100 entries
Brand compatibility	Yealink
Redial list capacity	20
Headphone connectivity	3.5 mm
Number of ringer volume levels	5
Display type	LCD
Product color	Black, Silver
Display diagonal	2.4 \
Display resolution	240 x 320 pixels
Standby time	400 h
Battery technology	Lithium
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Harmonized System (HS) code	85177900

Weight and Dimensions

Depth	53 mm
Width	176 mm
Height	23 mm