Yealink W56H User Manual

| Advanced Call Features | 67
Call Park and Call Retrieve
You can park a call, and then retrieve the call either from your phone or another phone. After parked, the
call is placed on hold, you can continue the conversation after retrieving it.
Note: Call park is not available on all servers. Check with your system administrator to find out if it
is available on your phone.
• Parking or Retrieving a Call in the FAC Mode
• Parking or Retrieving a Call in the Transfer Mode
Parking or Retrieving a Call in the FAC Mode
You can park the call to the local extension or the desired extension through dialing the park code.
• Parking a Call in the FAC Mode
• Retrieving a Parked Call in the FAC Mode
Parking a Call in the FAC Mode
You can park a call in the FAC mode directly. When you park a call to the local extension or the desired
extension, the call is held in the same network on your phone.
Before you begin
Your system administrator has set call park in the FAC mode.
Procedure
1. During a call, select Options > Call Park.
On the CP930W/DD phone, select More > Call Park(Park).
On the CP935W, select > Park.
The phone will dial the call park code which is pre-configured.
2. Do one of the following:
• If you want to park the call against the local extension, press the # key.
• If you want to park the call against the desired extension, enter the extension (for example, 4606)
where you want to park the call and press the # key.
If the call is parked successfully, you will hear a voice prompt that the call is parked.
Retrieving a Parked Call in the FAC Mode
You can retrieve a parked call in the FAC mode from any phone within your network.
Before you begin
Your system administrator has set call park in the FAC mode. There is a call parked on the extension. Get
the park retrieve code from your system administrator.
Procedure
1. Dial the park retrieve code.
2. Follow the voice prompt to retrieve:
• Press the # key on the phone where the call is parked.
• Enter the desired extension followed by # (for example, 4606#) on any phone.

Yealink W56H Specifications

General

Type	DECT telephone handset
Speakerphone	Yes
Compatibility	Yealink W56P
Number of melodies	9
Phonebook capacity	100 entries
Brand compatibility	Yealink
Redial list capacity	20
Headphone connectivity	3.5 mm
Number of ringer volume levels	5
Display type	LCD
Product color	Black, Silver
Display diagonal	2.4 \
Display resolution	240 x 320 pixels
Standby time	400 h
Battery technology	Lithium
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Harmonized System (HS) code	85177900

Weight and Dimensions

Depth	53 mm
Width	176 mm
Height	23 mm