-23-
2.3.3 CSU-X1-A1
A: Laser inlet
B: FC connector/shutter
C: Excitation filter (Option)
D: Dichroic mirror （See Specification List）
E: Barrier filter （See Specification List）
F: Camera port
*8X8mm adapter for EMCCD is available. (Option)
G: Direct view eyepiece unit (Option)
K: Dichroic mirror block (automatic control for up to three dichroic mirrors)
L: Filter Wheel (for up to six barrier filters)
This is a High-end model with motorized dichroic mirror unit for up to 3 dichroic
mirrors and a filter wheel for up to 6 filters.
Disk rotation speed is adjustable between 1,500～10,000rpm (CSU-X1-A1H ) or
between 1,500 ～ 5,000rpm(CSU-X1-A1N), respectively, if connected with the
control unit, CSU-X1CU-F1.
Microscope
Camera
E
To Next Page
Loading...
General