-24-
2.3.4 CSU-X1-A2
A: Laser inlet
B: FC connector/shutter
C: Excitation filter (Option)
D: Dichroic mirror （See Specification List）
E: Barrier filter （See Specification List）
F: Camera port
*8X8mm adapter for EMCCD is available. (Option)
H: Direct view eyepiece unit (Option)
K: Dichroic mirror block (automatic control, for up to three dichroic mirrors)
L: Filter Wheel (for up to six barrier filters)
M: Motorized light path switching port 1
N: Motorized light path switching port 2
This model is CSU-X1-A1 plus Bright Field port, which is an emission light path to
bypass the disks in the CSU-X1, and allows you to use the same camera for both
confocal and non-confocal imaging without light loss. Light path switching is
controlled by the control unit: CSU-X1CU-F1
Bright Field means non-confocal, wide-field images such as DLC, phase,
epifluorescence and TIRF.
Microscope
Camera
To Next Page
Loading...
General