-10-
3.2 Precautions
3.2.1 Safety Precautions
• Before you start to use the unit, please read this manual thoroughly
• .Do not remove the cover to avoid risk of burn injury, since some parts
inside the unit could become high temperature. Please contact Yokogawa
Electric Corporation or its representative, when you need inspection or
adjustment of this instrument.
• In case of such abnormal status as unusual odor or smoke goes up from
this instrument, turn off the power switch and disconnect power code.
Please contact Yokogawa Electric Corporation or its representative in such
unusual case.
• Do not put any objects on the cable. Do not let the cable touch heating
objects. When you disconnect the cable, do not pull the cable but always
pull the connector. In case a cable was damaged, please contact your local
representative for replacement order. You may find necessary parts
number in the packing list of this manual.
3.2.2 General precautions on handling
• Please do not place any liquid-containing objects on this unit, since liquid
spilling could damage the unit.
• Be careful not to add mechanical shock or drop the unit, which could result
in severe damage. Application of mechanical shock to the cable could
cause electric noise which may lead to malfunction..
• Avoid bringing any charged object close to the terminal, which may cause
failure.
• Please be most careful when you carry this unit. Remove the connecting
cable first, then use the handle on this unit to carry. This unit weighs
about 5 kg.
• Please do not wipe the plastic surface with organic solvents such as
benzene or paint thinner, which may cause discoloration. When the
surface of the unit gets dirty, please clean with soft cloth wet with dilute
solvent, and then wipe with a dry cloth.
To Next Page
General