-19-
(1) Power Switch
(2) Power ON indicator
Green LED lights when power is ON. LED is off when power is OFF.
(3) AC Inlet
Socket for AC POWER. Please use supplied power cable.
(4) Circuit breaker: 3A
(5) Cooling fan
(6) CSU connector
To connect with CSU-X1 with supplied CSU connector cable.
(7) EXT INTERFACE1/I.LOCK connector
For controller interlock and external input/output connection
(8) EXT INTERFACE2 connector
For external analogue input/output connection
(9) RS232C1 connector
For serial interface CH1 connection using supplied RS232C cable. When you use one
control unit, connect to PC, and connect to RS232C2 (CH2) if you use two control
units. Please firmly connect with fixing screw.
(10) RS232C2 connector
For serial interface CH2 connection using supplied RS232C cable. It is not
necessary when you use only one control Connect to RS232C1 (CH1) of the second
control unit if you use two control units. Please firmly connect with fixing screw.
(11) MOTOR1 connector
*CSUX1CU-F1 model: Connector for Filter wheel 1, connected with supplied FW1
cable. Please firmly connect with fixing screw..
*CSUX1CU-B1model: Connector for Bright Field１ connection, connected with
supplied Bright Field1 cable. Please firmly connect with fixing screw.
(12) MOTOR2 connector
*CSUX1CU-F1 model: Connector for FW1 connection, connected with supplied FW1
cable. Please firmly connect with fixing screw..
*CSUX1CU-B1model: Connector for Bright Field2 connection, connected with
supplied Bright Field2 cable. Please firmly connect with fixing screw.
(13) Identification label
MS code, rated supply voltage, product number and serial number
To Next Page
Loading...
General