Getting Started
19
Setup
Perform this procedure to start using the device for the first time.
1. Install a micro secure digital (SD) card (optional).
2. Install hand strap (optional).
3. Install the battery.
4. Charge the device.
5. Power on the device.
Installing a microSD Card
The microSD card slot provides secondary non-volatile storage. The slot is located under the battery pack.
Refer to the documentation provided with the card for more information, and follow the manufacturer’s
recommendations for use.
CAUTION: Follow proper electrostatic discharge (ESD) precautions to avoid damaging the microSD card. Proper ESD pre-
cautions include, but are not limited to, working on an ESD mat and ensuring that the operator is properly grounded.
1. Lift the access door.
Figure 4 Lift Access Door
2. Slide the microSD card holder to the unlock position.
24 Microphone Use for noise cancellation.
25 Exit Window Provides data capture using the imager.
26 Headset Jack For audio output to headset.
27 Programmable Button Programmable.
Table 2 Back View Features (Continued)
Number Item Function
To Next Page
Loading...
Need help?
General
Weight and Dimensions
