5 - 8 TC75x User Guide for Android Version 6.0.1
1. Ensure that an application is open on the device and a text field is in focus (text cursor in text field).
2. Point the DS3678 at a bar code.
Figure 5-13 Bar Code Scanning with DS3678 (-SR shown)
3. Press and hold the trigger.
Ensure the bar code is within the area formed by the aiming pattern. The aiming dot is used for increased
visibility in bright lighting conditions. The aiming dot is used for increased visibility in bright lighting conditions.
Figure 5-14 DS3678-SR Aiming Pattern
Figure 5-15 DS3678-SR Pick List Mode with Multiple Bar Codes in Aiming Pattern
4. The captured data appears in the text field.
Pairing the RS507/RS6000 Hands-Fee Imager
To connect the RS507 or RS6000 imagers to the TC70x/TC75x, use one of the following methods:
• Near Field Communication (NFC) (RS6000 only)
• Simple Serial Interface (SSI)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
