Data Capture 5 - 11
Figure 5-19 Bluetooth Pairing Utility
3. Using the RS507/RS6000, scan the bar code on the screen.
The RS507/RS6000 emits a high/low/high/low beeps. The Scan LED flashes green indicating that the
RS507RS6000 is attempting to establish connection with the TC70x/TC75x. When connection is established,
the Scan LED turns off and the RS507/RS6000 emits one string of low/high beeps.
A notification appears on the screen and the icon appears in the Status bar.
Pairing Using Bluetooth Human Interface Device
To pair the RS507/RS6000 with the TC70x/TC75x using HID:
1. Ensure that Bluetooth is enabled on both devices.
2. Ensure that the Bluetooth device to discover is in discoverable mode.
3. Ensure that the two devices are within 10 meters (32.8 feet) of one another.
4. Place the RS507/RS6000 in Human Interface Device (HID) mode. If the RS507/RS6000 is already in HID
mode, skip to step 5.
a. Remove the battery from the RS507/RS6000.
b. Press and hold the Restore key.
c. Install the battery onto the RS507/RS6000.
d. Keep holding the Restore key for about five seconds until a chirp is heard and the Scan LEDs flash green.
e. Scan the bar code below to place the RS507/RS6000 in HID mode.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
