Zte BLADE X User Manual

48 49
Connecting to Wi-Fi
Wi-Fi is a wireless networking technology that can provide Internet access at
distances of up to 300 feet (100 meters), depending on the Wi-Fi router and
your surroundings.
Turning Wi-Fi on and connecting to a Wi-Fi network
1. Tap the Arrow or swipe up from the bottom of the home screen, and
tap Settings > Wi-Fi.
2. If Wi-Fi is off, tap the switch to turn it on.
3. Tap a network name to connect to it.
4. If the network is secured, enter the password and tap CONNECT.
Note: Your phone automatically connects to previously used Wi-Fi networks
when they are in range.
Getting notied of open networks
1. Tap the Arrow or swipe up from the bottom of the home screen, and
tap Settings > Wi-Fi.
2. If Wi-Fi is off, tap the switch to turn it on.
3. Tap .
4. Tap the Network notication switch to turn it on.
When Wi-Fi is on, you receive notications in the Status Bar when your phone
detects an open Wi-Fi network. Switch off this option to turn off notications.
Adding a Wi-Fi network
You can add a Wi-Fi network if the network does not broadcast its name
(SSID) or if you are out of range.
To connect to a secured network, you rst need to get the security details
from the network’s administrator.
CONNECTING TO NETWORKS AND DEVICES
1. Tap the Arrow or swipe up from the bottom of the home screen, and
tap Settings > Wi-Fi.
2. If Wi-Fi is off, tap the switch to turn it on.
3. At the bottom of the list of available Wi-Fi networks, tap Add network.
4. Enter the network SSID (name). If necessary, enter security or other network
conguration details.
5. Tap SAVE.
Forgetting a Wi-Fi network
You can make your phone forget the details of a Wi-Fi network that
you added; for example, if you don’t want the phone to connect to it
automatically or if it is a network that you no longer use.
1. Tap the Arrow or swipe up from the bottom of the home screen, and
tap Settings > Wi-Fi.
2. If Wi-Fi is off, tap the switch to turn it on.
3. Tap > Saved networks.
4. Tap the Wi-Fi network name, and then tap FORGET.
Connecting to a WPS network
Wi-Fi Protected Setup (WPS) is a feature that makes it easy to add your phone
to access points that support WPS.
You can use one of the following methods to connect your phone to a
wireless network using WPS.
Method one: WPS button (recommended)
1. Tap the Arrow or swipe up from the bottom of the home screen, and
tap Settings > Wi-Fi.
2. If Wi-Fi is off, tap the switch to turn it on.
3. Tap > Advanced > WPS Push Button.
CONNECTING TO NETWORKS AND DEVICES

Zte BLADE X Specifications

General

Brand	Zte
Model	BLADE X
Category	Cell Phone
Language	English